Rgblink VSP 516S User Manual Bedienungsanleitung PDF herunterladen (Seite 129)

VSP 516S User Manual 129

(Figure 2)

5. Lift the top cover and back panel.

Caution: Do not touch any electronic components inside the VSP 516S.

Doing so could damage the processor. Electrostatic discharge (ESD) can

damage IC chips even though you cannot feel it. You must be electrically

grounded before proceeding with maintenance. A grounding wrist strap is

recommended.

6. Perform the desired maintenance procedure. See ―Install the SDI Optional

Module‖ in Part 2.

Part 2: Install the SDI Optional Module

Install the SDI optional Module in the VSP 516S as follows:

Warning: Changes to electronic components must be performed by

authorized service personnel only.

1. Open the processor. See ―Take Apart the VSP 516S‖ in Part 1.

2. On the main board port 2, locate SDI input board port 1, align and gently

apply pressure to mate input board with main board, as shown in Figure 3.

1 2 ... 124 125 126 127 128 129 130 131

Keine Kommentare

Rgblink VSP 516S User Manual Bedienungsanleitung Seite 129